Cleaning a Painted vs Stained Deck: Different Rules
Not all decks are cleaned the same way, and the biggest variable is the finish. A painted deck and a stained deck react differently to cleaning, and treating them the same is how finishes get damaged. Knowing which you have, and how it changes the approach, is the difference between a clean deck and a peeling one.

Painted decks: protect the film
Paint sits on top of the wood as a film, and that film is what you have to protect. High pressure lifts and peels paint, especially where it is already a little loose, so a painted deck is cleaned gently: a cleaner breaks down the algae, mildew and grime, and the deck is rinsed at low pressure that the paint withstands. The green film that makes a painted deck lethally slick when wet comes off without stripping the colour.
Where paint is already failing, cleaning reveals it, and those areas will need scraping and repainting rather than being blasted, which only accelerates the peeling.
Stained decks: clean into the wood
Stain penetrates the wood rather than sitting on top, so a stained or bare deck is cleaned to lift the grey surface fibres and the growth from the wood itself, still at low pressure and along the grain to avoid furring. This both cleans the deck and prepares it, since a stained deck being cleaned is often on its way to a re-stain.
The rule shared with painted decks is the same: let the cleaner do the work and keep the pressure low. High pressure tears stained and bare wood just as it peels paint.

Knowing which you have, and what comes next
If water beads on the surface and the wood grain is hidden under a solid colour, it is likely painted or has a solid-colour stain sitting as a film. If the grain shows through and the colour is in the wood, it is a penetrating stain. Either way, the cleaning is gentle; what differs is what follows, repainting failed areas versus re-staining worn wood.
If you plan to refinish, clean first and let the deck dry, since both paint and stain need a clean, sound, dry surface to bond to. A photo of the deck helps identify the finish and advise on the right approach.
